Showing posts with label tiedye. Show all posts
Showing posts with label tiedye. Show all posts

Wednesday, 16 April 2014

DIY: front tie, tie-dyed tank top

Hey guys! So today I'm going to show you how to upcycle an old t-shirt into a cool front tie, tie-dyed tank top! It's also a good idea to wear an old shirt while doing this so that you don't ruin a good one with dye.


Materials:
  • Old t-shirt
  • Fabric scissors
  • Dye
  • Rubber bands
  • Garbage bags
  • disposable gloves
Step 1:
Decide how high you want your shirt to be on your waist and mark this with a sharpie.Once you have this marked, approximately find the middle of the shirt. Now you will leave about 4 inches on either side of the middle and mark this now 8 inch gap on both sides with a sharpie.

Cut the front and back of the shirt on side until you reach the line that marks the gap and repeat this on the other side. When you get to the line continue cutting straight across on the back but do not cut the front. Once you have the back cut, draw lines on the fabric hanging down on the front of the shirt so that it looks like a triangle.



Once you have the triangle cut, cut the hem off of the bottom if you haven't already. Now cut a strip up the middle and round the ends so that you have two pieces that can be tied together.


Step 2:
Cut the sleeves off of the t-shirt to your desired depth and thickness. Then fold the shirt so that you can use the sleeve you already cut as a guide for the second sleeve.


 I cut my sleeves fairly deep because I want to have low sides so that I can wear a bandeau with this.

Next cut the collar however you would like. I left mine high and didn't cut it much deeper than the original collar because I like the high collared style for tank tops.


Step 3:
This is the fun part! Now you get to tie-dye the shirt. These steps show how to do the spiral pattern but you could google other patterns if you don't want to do the spiral.

You may need to soak your shirt in soda ash depending on the type of dye you use. I had to soak mine and I let it sit in the soda ash for twenty minutes. After it has finished soaking, cover the area where you will be dyeing the shirt with a garbage bag. Don't forget to put on your disposable gloves!

Pinch the shirt in the middle or wherever you want the center of your spiral to be. 

Now turn the piece that you pinched clockwise while keeping it tight. It should end up looking like this:


Now secure this ball with rubber bands. You can use however many you want; I used three. 


After you have the ball secured with rubber bands, begin tie dyeing the shirt. Decide how you want to dye it (alternating colours, etc) and begin to dye each section. Make sure that you push the dye into each piece fairly hard so that you won't be left with too much white. 

(I know the lid is on, it's too hard to actually dye it and take pictures at the same time lol).
After the top of the ball is done, flip it over and repeat on the side that was sitting on the garbage bag. Remember your pattern and make sure you're dyeing it the same colour on this side.

Step 4:
After you finished dyeing both sides of your ball, cut the rubber bands and leave the shirt to set. I just put mine in a plastic bag and left it for about five hours. After the dye has had a fair amount of time to set rinse it out and then wash it. After you have washed the shirt rinse it once more. The water coming off of the shirt should be close to clear now. You may want to wash this separate from other clothes in the washing machine for the first few washes so that you don't ruin other clothes. 

That's it! Now you're done and you have a super cute new tank top for summer time! :-)

Thursday, 27 February 2014

Tie-Dye Cupcakes!!

My first real post is actually here?! I know, unbelievable right? Haha well this post is going to show you how to make tie-dye cupcakes!

 To start you need enough bowls for the amount of colours you want, any type of white cupcake batter, food colouring and a muffin tin along with cupcake liners.


The essentials!

 After your batter is all prepared pour it into separate bowls. I had four bowls for four colours. Once you have the batter put into your bowls, begin creating your colours. I made blue, green, purple and pink although the picture only includes the blue, red and the purple before it was mixed.

My coloured batter.

Once you have mixed your colours, it's time to get creative! Now you can choose your technique for 'tie-dying' your cupcakes. You can flick the batter with the spoon, swirl it or just create a pattern by layering the colours. Do whatever you think looks best. Get creative!

Cupcakes ready to be baked!

My approach to the tie-dye cupcakes was to begin by layering the colours so that when you bite into the cupcake there is a continuous change of colour throughout. Once it was close to being full I began to swirl and flick the batter to create very random designs. I had no plan for the design and just did what I thought looked good. 

Cupcakes fresh from the oven.
The creativity doesn't have to end here! You can dye your icing  to add more colour if you would like or just use plain icing. I used plain white icing so that when you bite into the cupcake you get a nice colourful surprise. 

The cupcakes with icing
Cupcake with a bite taken out of it. 
ps: sorry for the blurriness, that was the best picture that I got and I just couldn't leave it out!

Have fun making your cupcakes and don't be afraid to make a mess and get creative! Leave a comment if you tried this and tell me your opinion on this. Any suggestions for new posts are welcome! :-)